OPTICLIMATE
WATER-COOLED

The water-cooled OptiClimate cools the air using water as a cooling medium and warms it up using ceramic heating elements. The OptiClimate has a water inlet and outlet. The inlet is connected to the water supply. The cold water is used to cool the air, causing the water temperature to rise from 35°C to 50°C. This hot water is then channelled via the water outlet or recycled. This is ideal for cooling objects near water sources such as canal houses, houseboats, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is also perfect for historic buildings where no external unit may be installed. If your house has a swimming pool, you can use a water-cooled OptiClimate to cool your house and heat up the pool.

PRO3 & PRO4

The water-cooled OptiClimate is available in PRO3 and PRO4 models. The specifications of both models differ, in addition, the dehumidification function of a PRO3 and a PRO4 operates slightly different.

DEHUMIDIFYING WITH THE PRO3

The OptiClimate PRO3 dehumidifies by continuously finding the right balance between heating and cooling. This enables the dehumidifying function to work even after the desired temperature has been reached. The dehumidifying capacity of the PRO3 is more than sufficient for most applications. This is one-and-a-half to twice as efficient as a building dryer.

DEHUMIDIFYING WITH THE PRO4

The PRO4 has the innovative property of continuous dehumidification, using its own warmth without having to cool the air. Fluctuations in humidity are therefore zero. This results in very low energy consumption. The PRO4 uses no water when dehumidifying. If you use the PRO4 frequently, this will soon start paying off in terms of power and water costs. The PRO4’s dehumidifying function is incredibly powerful and efficient. Its dehumidifying capacity is two to three times greater than that of a building dryer.

INVERTER

Inverter technology ensures even control of the temperature and humidity. The Inverter enables the OptiClimate to continuously adjust the temperature smoothly to the set temperature. The OptiClimate Inverter reacts directly to even the smallest divergence between the set temperature and the current temperature. The Inverter technology prevents the frequent activation and deactivation of the compressor, thereby preventing peaks in the power supply. The OptiClimate Inverter therefore uses less water and power and creates a more even temperature and humidity levels. This technology also uses ‘soft start’ and the compressor speed is gradually increased, preventing a high start-up current.
The OptiClimate Inverter has the unique property of being multiphase, meaning that the compressor can be connected to both 230-240V single phase or 400V 3-phase.

RELATED PRODUCTS

FAN/PUMP CONTROLLER PACKAGE

For controlling the OptiClimate system.

VIBRATION ISOLATOR SPRINGS

These springs provide a 98% vibration isolation.

CARBON FILTERS

Filters odour and mold spores from the air.

en_GBEnglish